山あり谷あり、非力なマイコンでuClinuxを動かすべし：−ザ・組み込み−ソフトウェアのハードウェア化（3）（4/4 ページ）

# cp /root/3069F/linux.bin /tftpboot 

RedBoot> load -v /tftpboot/linux.bin
Using default protocol (TFTP)
Entry point: 0x00400004, address range: 0x003fff8c-0x004d6a24 

/opt/aki3069f   192.168.0.0/255.255.255.0(rw,insecure,async,no_root_squash) 

#
# hosts.allow   This file describes the names of the hosts which are
#               allowed to use the local INET services, as decided
#               by the '/usr/sbin/tcpd' server.
#
rpc.mountd: ALL
portmap: ALL
rquotad: ALL
mountd: ALL
statd: ALL 

# /etc/init.d/nfs start 

RedBoot> exec -c "console=ttySC1,38400n81 nfsroot=192.168.0.1:/opt/aki3069f"

RedBoot> exec -c "console=ttySC1,38400n81 nfsroot=192.168.0.1:/opt/aki3069f"
Now booting linux kernel:
Entry Address 0x00400000
Cmdline : console=ttySC1,38400n81 nfsroot=192.168.0.1:/opt/aki3069f
Linux version 2.4.31-uc0 (root@localhost) (gcc version 3.4.3) #2 2008年 9月 1 1日 木曜日 08:17:45 JST
uClinux H8/300H
Target Hardware: AE-3068
H8/300 series support by Yoshinori Sato <ysato@users.sourceforge.jp>
Flat model support (C) 1998,1999 Kenneth Albanowski, D. Jeff Dionne
On node 0 totalpages: 1536
zone(0): 0 pages.
zone(1): 1536 pages.
zone(2): 0 pages.
Kernel command line: console=ttySC1,38400n81 nfsroot=192.168.0.1:/opt/aki3069 f
virtual vector at 0x00fffd20
Calibrating delay loop... 3.26 BogoMIPS
Memory available: 984k/1067k RAM, 0k/0k ROM (781k kernel code, 196k data)
Dentry cache hash table entries: 1024 (order: 1, 8192 bytes)
Inode cache hash table entries: 512 (order: 0, 4096 bytes)
Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer cache hash table entries: 1024 (order: 0, 4096 bytes)
Page-cache hash table entries: 2048 (order: 1, 8192 bytes)
POSIX conformance testing by UNIFIX
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
SuperH SCI(F) driver initialized
ttySC0 at 0x00ffffb0 is a SCI
ttySC1 at 0x00ffffb8 is a SCI
ttySC2 at 0x00ffffc0 is a SCI
ne.c:v1.10 9/23/94 Donald Becker (becker@scyld.com)
Last modified Nov 1, 2000 by Paul Gortmaker
NE*000 ethercard probe at 0x200000: 00 02 cb 01 86 c2
eth0: NE1000 found at 0x200000, using IRQ 17.
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 512 bind 1024)
Sending DHCP requests ., OK
IP-Config: Got DHCP answer from 0.0.0.0, my address is 192.168.0.2
IP-Config: Complete:
device=eth0, addr=192.168.0.2, mask=255.255.255.0, gw=255.255.255.255,
host=192.168.0.2, domain=, nis-domain=(none),
bootserver=0.0.0.0, rootserver=192.168.0.1, rootpath=
Looking up port of RPC 100003/2 on 192.168.0.1
Looking up port of RPC 100005/1 on 192.168.0.1
nfs: server 192.168.0.1 not responding, still trying
nfs: server 192.168.0.1 OK
VFS: Mounted root (nfs filesystem).
Freeing unused kernel memory: 32k freed (0x4ce000 - 0x4d5000)
Shell invoked to run file: /etc/rc
Command: hostname AE3068
Command: mount -t proc proc /proc
Command: cat /etc/motd
Welcome to
           ____ _  _
         /  __| ||_|
    _   _| |  | | _ ____  _   _  _  _
   | | | | |  | || |  _ \| | | |\ \/ /
   | |_| | |__| || | | | | |_| |/    \
   |  ___\____|_||_|_| |_|\____|\_/\_/
   | |
   |_|
Akizukidenshi/AE-3068 (aki3069net) port.
For further information check:
http://www.uclinux.org/
Execution Finished, Exiting
init: Failed to open /etc/inittab.
Sash command shell (version 1.1.1)
/>